Test Catalog

Test Id : HGBCE

Order This Test

Hemoglobin Variant, A2 and F Quantitation, Blood

Download
Overview

Test Catalog

Useful For
Suggests clinical disorders or settings where the test may be helpful

Monitoring patients with sickling disorders who have received hydroxyurea or transfusion therapy

 

This test is not intended for diagnostic purposes.

 

This test is not useful for screening purposes.

Method Name
A short description of the method used to perform the test

Capillary Electrophoresis

NY State Available
Indicates the status of NY State approval and if the test is orderable for NY State clients.

Yes

Reporting Name
Lists a shorter or abbreviated version of the Published Name for a test

Hb Variant, A2 and F Quantitation,B

Aliases
Lists additional common names for a test, as an aid in searching

SFMON

S monitoring

Hb F level

Sickle monitoring

HBF

A2F

A2 Hemoglobin

F-Hemoglobin

Hemoglobin A2

Hemoglobin A2 and F, blood

Hemoglobin F

Specimen Type
Describes the specimen type validated for testing

Whole Blood EDTA

Ordering Guidance

This test is intended for monitoring purposes, such as the increase in hemoglobin F after therapy or the levels of hemoglobin variants after transfusion.

 

If the patient has never been appropriately studied, hemoglobin electrophoresis is necessary; see HBEL1 / Hemoglobin Electrophoresis Evaluation, Blood.

 

Multiple hematology evaluations are available. For information on testing that is performed with each evaluation, see Benign Hematology Evaluation Comparison.

Specimen Required
Defines the optimal specimen required to perform the test and the preferred volume to complete testing

Container/Tube:

Preferred: Lavender top (EDTA)

Acceptable: Yellow top (ACD) or green top (heparin)

Specimen Volume: 4 mL

Collection Instructions:

1. Submit fresh specimen.

2. Send whole blood specimen in original tube. Do not aliquot.

Special Instructions
Library of PDFs including pertinent information and forms related to the test

Forms

1. Metabolic Hematology Patient Information (T810)

2. If not ordering electronically, complete, print, and send a Benign Hematology Test Request Form (T755) with the specimen.

Specimen Minimum Volume
Defines the amount of sample necessary to provide a clinically relevant result as determined by the Testing Laboratory

1 mL

Reject Due To
Identifies specimen types and conditions that may cause the specimen to be rejected

Gross hemolysis OK

Specimen Stability Information
Provides a description of the temperatures required to transport a specimen to the performing laboratory, alternate acceptable temperatures are also included

Specimen Type Temperature Time Special Container
Whole Blood EDTA Refrigerated 10 days

Useful For
Suggests clinical disorders or settings where the test may be helpful

Monitoring patients with sickling disorders who have received hydroxyurea or transfusion therapy

 

This test is not intended for diagnostic purposes.

 

This test is not useful for screening purposes.

Clinical Information
Discusses physiology, pathophysiology, and general clinical aspects, as they relate to a laboratory test

The treatment of red blood cell sickling disorders may involve many therapeutic modalities. Two of the most important and beneficial are treatment with hydroxyurea and chronic transfusion therapy. Hydroxyurea causes elevation of fetal hemoglobin (HbF) levels, and transfusion serves to lower the percentage of hemoglobin S (HbS). Both of these therapeutic modalities act to lessen the number and severity of sickling crises. Thus, periodic monitoring of HbF and HbS levels are needed to guide further therapy.

Reference Values
Describes reference intervals and additional information for interpretation of test results. May include intervals based on age and sex when appropriate. Intervals are Mayo-derived, unless otherwise designated. If an interpretive report is provided, the reference value field will state this.

HEMOGLOBIN A

0-30 days: 5.9-77.2%

1-2 months: 7.9-92.4%

3-5 months: 54.7-97.1%

6-8 months: 80.0-98.0%

9-12 months: 86.2-98.0%

13-17 months: 88.8-98.0%

18-23 months: 90.4-98.0%

> or =24 months: 95.8-98.0%

 

HEMOGLOBIN A2

0-30 days: 0.0-2.1%

1-2 months: 0.0-2.6%

3-5 months: 1.3-3.1%

> or =6 months: 2.0-3.3%

 

HEMOGLOBIN F

0-30 days: 22.8-92.0%

1-2 months: 7.6-89.8%

3-5 months: 1.6-42.2%

6-8 months: 0.0-16.7%

9-12 months: 0.0-10.5%

13-17 months: 0.0-7.9%

18-23 months: 0.0-6.3%

> or =24 months: 0.0-0.9%

 

VARIANT 1

0.0

 

VARIANT 2

0.0

 

VARIANT 3

0.0

Interpretation
Provides information to assist in interpretation of the test results

Clinically, optimal levels of hemoglobin (Hb) S and fetal hemoglobin (HbF) are patient specific and depend on a number of factors including response to therapy. This test will be performed by capillary electrophoresis and any detected variant present will be reported as their zone only, including HbS. No confirmatory functional study, such as sickle solubility, will be performed as this test is designed for quantitative monitoring of previously confirmed hemoglobin fractions.

 

Information reported: Percentages of HbA, HbA2, HbF and any detected hemoglobin variant present. Variants will be reported as zones and are not specific, even if present in Z5 (Zone S). If the identity of the variant has not been previously confirmed, diagnostic hemoglobin electrophoresis testing is necessary; see HBEL1 / Hemoglobin Electrophoresis Evaluation, Blood.

Cautions
Discusses conditions that may cause diagnostic confusion, including improper specimen collection and handling, inappropriate test selection, and interfering substances

Peaks present in zones Z9, Z7, Z6, Z5, Z4, Z3, and Z2-recently labeled the Z(A), Z(F), Z(D), Z(S), Z(E), Z(A2), and Z(C) zones, respectively-may not represent the hemoglobin fractions the zones are named after as other variants can migrate to these zones, including the S, F, A, and A2 positions.

 

Although the most common variants are easily detected, many hemoglobin variants are not detected by the capillary electrophoresis method alone or can migrate with, and cannot be discriminated from, common variants. Therefore, this test should not be used for screening purposes due to low sensitivity.

 

Recent transfusion may mask protein results including hemoglobin electrophoresis, hereditary persistence of fetal hemoglobin by flow cytometry, stability studies, and sickle solubility studies depending on percentage of transfused cells present.

 

Some hemoglobin variants can originate from the donor blood product and not from the tested recipient. These are typically found in low percentage.

 

Some hemoglobin variants do not sufficiently resolve from other peaks, which precludes separate quantitation of percentages. These will be reported as a single percentage that represents more than 1 variant.

 

Some therapies cause artefactual effects in protein studies, including Voxelotor (artefactual peaks). These peaks may vary between samples or patients.

Clinical Reference
Recommendations for in-depth reading of a clinical nature

1. Riou J, Szuberski J, Godart C, et al. Precision of CAPILLARYS 2 for the detection of hemoglobin variants based on their migration positions. Am J Clin Pathol. 2018;149(2):172-180

2. National Heart, Lung, and Body Institute Expert Panel: Evidence-Based Management of Sickle Cell Disease: Expert Panel Report, 2014. NIH Publication No. 02-2117 US Department of Health and Human Services: National Institutes of Health; 2014:1-142

3. Rosse WF, Telen M, Ware R: Transfusion Support for Patients with Sickle Cell Disease. American Association of Blood Banks; 1998

4. Ferster A, Tahriri P, Vermylen C, et al. Five years of experience with hydroxyurea in children and young adults with sickle cell disease. Blood. 2001;97:3268-3632

5. Charache S, Terrin ML, Moore RD, et al. Effect of hydroxyurea on the frequency of painful crises in sickle cell anemia. Investigators of the Multicenter Study of Hydroxyurea in Sickle Cell Anemia. N Engl J Med. 1995;332(20):1317-1322

6. Keren DF, Shalhoub R, Gulbranson R, Hedstrom D. Expression of hemoglobin variant migration by capillary electrophoresis relative to hemoglobin A2 improves precision. Am J Clin Pathol. 2012;137(4):660-664

Method Description
Describes how the test is performed and provides a method-specific reference

The CAPILLARYS System is an automated system that uses capillary electrophoresis to separate charged molecules by their electrophoretic mobility in an alkaline buffer. Separation occurs according to the electrolyte pH and electro-osmotic flow. A sample dilution with hemolyzing solution is injected by aspiration. A high-voltage protein separation occurs with direct detection of the hemoglobin protein fractions at 415 nm, which is specific to hemoglobins. The resulting electropherogram peaks are evaluated for pattern abnormalities and are quantified as a percentage of the total hemoglobin present. For diagnostic purposes, the overall schematic has been grouped into 15 unequal zones (Z) numbered from right to left with zones Z9, Z7, Z6, Z5, Z4, Z3 and Z2-relabeled as Z(A), Z(F), Z(D), Z(S), Z(E), Z(A2) and Z(C) zones, respectively. Hemoglobin A (Hb A) and Hb A2 are used as internal standards and are assigned the numerical positions 150 and 243, respectively.(Louahabi A, Philippe M, Lali S, Wallemacq P, Maisin D. Evaluation of a new Sebia kit for analysis of hemoglobin fractions and variants on the Capillarys system. Clin Chem Lab Med. 2006;44[3]:340-345; instruction manual: CAPILLARYS Hemoglobin[E] using the CAPILLARYS 2 flex-piercing instrument. Sebia; 06/2014)

PDF Report
Indicates whether the report includes an additional document with charts, images or other enriched information

No

Day(s) Performed
Outlines the days the test is performed. This field reflects the day that the sample must be in the testing laboratory to begin the testing process and includes any specimen preparation and processing time before the test is performed. Some tests are listed as continuously performed, which means that assays are performed multiple times during the day.

Monday through Friday

Report Available
The interval of time (receipt of sample at Mayo Clinic Laboratories to results available) taking into account standard setup days and weekends. The first day is the time that it typically takes for a result to be available. The last day is the time it might take, accounting for any necessary repeated testing.

Same day/1 to 2 days

Specimen Retention Time
Outlines the length of time after testing that a specimen is kept in the laboratory before it is discarded

7 days

Performing Laboratory Location
Indicates the location of the laboratory that performs the test

Rochester

Fees
Several factors determine the fee charged to perform a test. Contact your U.S. or International Regional Manager for information about establishing a fee schedule or to learn more about resources to optimize test selection.

  • Authorized users can sign in to Test Prices for detailed fee information.
  • Clients without access to Test Prices can contact Customer Service 24 hours a day, seven days a week.
  • Prospective clients should contact their account representative. For assistance, contact Customer Service.

Test Classification
Provides information regarding the medical device classification for laboratory test kits and reagents. Tests may be classified as cleared or approved by the US Food and Drug Administration (FDA) and used per manufacturer instructions, or as products that do not undergo full FDA review and approval, and are then labeled as an Analyte Specific Reagent (ASR) product.

This test has been modified from the manufacturer's instructions. Its performance characteristics were determined by Mayo Clinic in a manner consistent with CLIA requirements. This test has not been cleared or approved by the US Food and Drug Administration.

CPT Code Information
Provides guidance in determining the appropriate Current Procedural Terminology (CPT) code(s) information for each test or profile. The listed CPT codes reflect Mayo Clinic Laboratories interpretation of CPT coding requirements. It is the responsibility of each laboratory to determine correct CPT codes to use for billing.

CPT codes are provided by the performing laboratory.

83020

LOINC® Information
Provides guidance in determining the Logical Observation Identifiers Names and Codes (LOINC) values for the order and results codes of this test. LOINC values are provided by the performing laboratory.

Test Id Test Order Name Order LOINC Value
HGBCE Hb Variant, A2 and F Quantitation,B 43113-0
Result Id Test Result Name Result LOINC Value
Applies only to results expressed in units of measure originally reported by the performing laboratory. These values do not apply to results that are converted to other units of measure.
41927 Hb A 20572-4
41928 Hb F 32682-7
41929 Hb A2 4552-6
41930 Variant 1 24469-9
41931 Variant 2 24469-9
41932 Variant 3 24469-9
41933 HGBCE Interpretation 78748-1

Test Setup Resources

Setup Files
Test setup information contains test file definition details to support order and result interfacing between Mayo Clinic Laboratories and your Laboratory Information System.

Excel | PHP Pdf | CMS Pdf

Sample Reports
Normal and Abnormal sample reports are provided as references for report appearance.

Normal Reports | Abnormal Reports

SI Sample Reports
International System (SI) of Unit reports are provided for a limited number of tests. These reports are intended for international account use and are only available through MayoLINK accounts that have been defined to receive them.

SI Normal Reports | SI Abnormal Reports