Test Catalog

Test Id : TBPZA

Susceptibility, Mycobacterium tuberculosis Complex, Pyrazinamide, Varies

Useful For
Suggests clinical disorders or settings where the test may be helpful

Susceptibility testing of Mycobacterium tuberculosis complex isolates growing in pure culture against pyrazinamide

 

Confirming M tuberculosis complex resistance to pyrazinamide

Reflex Tests
Lists tests that may or may not be performed, at an additional charge, depending on the result and interpretation of the initial tests.

Test Id Reporting Name Available Separately Always Performed
MTBVP Mtb PZA Confirmation, pnc A Sequence No, (Bill Only) No

Additional Tests
Lists tests that are always performed, at an additional charge, with the initial tests.

Test Id Reporting Name Available Separately Always Performed
STVP Susceptibility, Mtb Complex, PZA No, (Bill Only) Yes

Testing Algorithm
Delineates situations when tests are added to the initial order. This includes reflex and additional tests.

When this test is ordered the additional test will always be performed at an additional charge.

If resistance to pyrazinamide is detected, the reflex test for confirmation of resistance will be performed at an additional charge.

Method Name
A short description of the method used to perform the test

Broth Dilution at Critical Drug Concentrations

NY State Available
Indicates the status of NY State approval and if the test is orderable for NY State clients.

Yes

Reporting Name
Lists a shorter or abbreviated version of the Published Name for a test

Susceptibility, Mtb Complex, PZA

Aliases
Lists additional common names for a test, as an aid in searching

Acid-Fast Bacilli (AFB)

AFB (Acid-Fast Bacilli)

Antibiotic Susceptibility

Antimicrobial Susceptibility, Mycobacterium tuberculosis

Bacillus, Acid-Fast

MTB (Mycobacterium tuberculosis)

Mycobacteria Antimicrobial Susceptibility (MIC) (Minimum Inhibitory Concentration)

Mycobacterium tuberculosis (MTB)

Susceptibility Testing

Susceptibility, Mycobacterium tuberculosis

TB (Tuberculosis)

Tubercle Bacilli: Mycobacterium tuberculosis

Tuberculosis (TB)

Testing Algorithm
Delineates situations when tests are added to the initial order. This includes reflex and additional tests.

When this test is ordered the additional test will always be performed at an additional charge.

If resistance to pyrazinamide is detected, the reflex test for confirmation of resistance will be performed at an additional charge.

Specimen Type
Describes the specimen type validated for testing

Varies

Ordering Guidance

To test for first-line agents, isoniazid, rifampin and ethambutol, order TB1LN / Antimicrobial Susceptibility, Mycobacterium tuberculosis Complex, First Line, Varies

Additional Testing Requirements

CTB / Mycobacteria and Nocardia Culture, Varies or CTBID / Culture Referred for Identification, Mycobacterium and Nocardia, Varies must also be ordered and will be charged separately unless identification of organism is provided.

Shipping Instructions

1. See Infectious Specimen Shipping Guidelines

2. Place specimen in a large infectious container (T146) and label as an etiologic agent/infectious substance.

Necessary Information

Specimen source and suspected organism identification are required.

ORDER QUESTIONS AND ANSWERS

Question ID Description Answers
Q00M0074 Specimen source (Required) and Organism Identification (Required unless concurrent identification test is ordered)

Specimen Required
Defines the optimal specimen required to perform the test and the preferred volume to complete testing

Specimen Type: Organism

Supplies: Infectious Container, Large (T146)

Container/Tube: Middlebrook 7H10 agar slant

Specimen Volume: Isolate

Collection Instructions: Organism must be in pure culture, actively growing.

Special Instructions
Library of PDFs including pertinent information and forms related to the test

Forms

If not ordering electronically, complete, print, and send a Microbiology Test Request (T244) with the specimen.

Reject Due To
Identifies specimen types and conditions that may cause the specimen to be rejected

Other Agar plate

Specimen Stability Information
Provides a description of the temperatures required to transport a specimen to the performing laboratory, alternate acceptable temperatures are also included

Specimen Type Temperature Time Special Container
Varies Ambient (preferred)
Refrigerated

Useful For
Suggests clinical disorders or settings where the test may be helpful

Susceptibility testing of Mycobacterium tuberculosis complex isolates growing in pure culture against pyrazinamide

 

Confirming M tuberculosis complex resistance to pyrazinamide

Testing Algorithm
Delineates situations when tests are added to the initial order. This includes reflex and additional tests.

When this test is ordered the additional test will always be performed at an additional charge.

If resistance to pyrazinamide is detected, the reflex test for confirmation of resistance will be performed at an additional charge.

Clinical Information
Discusses physiology, pathophysiology, and general clinical aspects, as they relate to a laboratory test

Primary treatment regimens for Mycobacterium tuberculosis complex often include isoniazid, rifampin, ethambutol, and pyrazinamide (PZA). Susceptibility testing of each M tuberculosis complex isolate against these first-line antimycobacterial agents is a key component of patient management.

 

The Clinical and Laboratory Standards Institute (CLSI) provides consensus protocols for the methods, antimycobacterial agents, and critical concentrations of each agent to be tested in order to permit standardized interpretation of M tuberculosis complex susceptibility test results. Current recommendations indicate that laboratories should use a rapid broth method in order to obtain M tuberculosis complex susceptibility data as quickly as possible to help guide patient management. According to the CLSI, resistance can be confirmed by another method or by another laboratory at the discretion of the testing laboratory.

 

This test uses an FDA-cleared commercial system for rapid broth susceptibility testing of M tuberculosis complex against PZA. Since the literature indicates that broth testing of PZA can, at times, produce falsely resistant results, resistance to PZA by the broth method is automatically confirmed by pncA DNA sequencing. The pncA gene of M tuberculosis complex is responsible for activation of the prodrug PZA and hence PZA activity. Variations in the pncA gene and upstream promoter region have been reported to account for the majority (70%-97%) of PZA-resistant isolates. However, 3% to 30% of PZA-resistant isolates do not have a corresponding pncA variant and other genes (eg, rpsA) may also play a role.

 

A separate test is available for testing of the other first-line agents (isoniazid, rifampin and ethambutol). If desired, this must be ordered separately; TB1LN / Antimicrobial Susceptibility, Mycobacterium tuberculosis Complex, First Line, Varies.

Reference Values
Describes reference intervals and additional information for interpretation of test results. May include intervals based on age and sex when appropriate. Intervals are Mayo-derived, unless otherwise designated. If an interpretive report is provided, the reference value field will state this.

Results are reported as susceptible or resistant.

Interpretation
Provides information to assist in interpretation of the test results

Mycobacterium tuberculosis complex isolates are reported as susceptible or resistant to pyrazinamide at the critical concentration.

Cautions
Discusses conditions that may cause diagnostic confusion, including improper specimen collection and handling, inappropriate test selection, and interfering substances

For resistant organisms, confirmatory testing using pncA DNA sequencing is automatically performed and the presence or absence of pncA variations associated with pyrazinamide resistance is reported.

 

In vitro susceptibility does not guarantee clinical response. Therefore, the decision to treat with a particular agent should not be based solely on the antimicrobial susceptibility testing result.

 

Susceptibility testing should be performed on pure culture isolates of Mycobacterium tuberculosis complex.

 

Some variants associated with pyrazinamide resistance that may occur outside of the pncA promoter and gene region and may therefore not be confirmed by DNA sequencing of this target.

Clinical Reference
Recommendations for in-depth reading of a clinical nature

1. Blumberg HM, Burman WJ, Chaisson RE, et al: American Thoracic Society/Centers for Disease Control and Prevention/Infectious Diseases Society of America: treatment of tuberculosis. Am J Respir Crit Care Med 2003;167(4):603-662

2. Woods GL, Lin S-Y G, Desmond EP: Susceptibility test methods: Mycobacteria, Nocardia and other Actinomycetes. In Manual of Clinical Microbiology.10th edition. Edited by J Versalovic, KC Carroll, G Funke, et al. ASM Press, 2011, pp 1215-1238

3. Dormandy J, Somoskovi A, Kreiswirth BN, et al: Discrepant results between pyrazinamide susceptibility testing by the reference BACTEC 460TB method and pncA DNA sequencing in patients infected with multidrug-resistant W-Beijing Mycobacterium tuberculosis strains. Chest 2007;131:497-501

4. Chedore P, Bertucci L, Wolfe J: Potential for Erroneous Results Indicating Resistance When Using the BACTEC MGIT 960 System for Testing Susceptibility of Mycobacterium tuberculosis to Pyrazinamide. J Clin Microbiol 2010 Jan;48(1):300-301

5. Campbell PJ, Morlock GP, Sikes RD, et al: Molecular resistance of mutations associated with first- and second-line drug resistance compared with conventional drug susceptibility testing of Mycobacterium tuberculosis. Antimicrob Agents Chemother 2011;55:2032-2041

6. Shi W, Zhang X, Jiang X, et al: Pyrazinamide inhibits trans-translation in Mycobacterium tuberculosis. Science 2011;333:1630-1632

7. CLSI, Susceptibility Testing of Mycobacteria, Nocardiae, and Other Actinomycetes; Approved Standard, Third edition. CLSI document M24. Clinical and Laboratory Standards Institute, 2018

8. CLSI. Performance Standards for Susceptibility Testing of Mycobacteria, Nocardia species, and Other Aerobic Actinomycetes. First edition. CLSI supplement M62. Clinical and Laboratory Standards Institute; 2018

9. LaBombardi VJ: Comparison of the ESP and BACTEC Systems for testing susceptibilities of Mycobacterium tuberculosis complex isolates to pyrazinamide. J Clin Microbiol 2002;40:2238-2239

10. Espasa M, Salvado M, Vicente E, et al: Evaluation of the VersaTREK system compared to the Bactec MGIT 960 system for first-line drug susceptibility testing of Mycobacterium tuberculosis. J Clin Microbiol 2012;50:488-491

11. Somoskovi A, Dormandy J, Parson LM, et al: Sequencing of the pncA gene in members of the Mycobacterium tuberculosis complex has important diagnostic applications: Identification of a species-specific pncA mutation in "Mycobacterium canettii" and the reliable and rapid predictor of pyrazinamide resistance. Confirmation of pyrazinamide resistance is done using Sanger dideoxy sequencing of approximately 700bp of the pncA gene and promoter region. J Clin Microbiol 2007;45:595-599

12. Jureen P, Werngren J, Toro JC, Hoffner S: Pyrazinamide resistance and pncA gene mutations in Mycobacterium tuberculosis. Antimicrob Agents Chemother 2008;52:1852-1854

Method Description
Describes how the test is performed and provides a method-specific reference

This test method is based on presence or absence of growth of Mycobacterium tuberculosis in broth cultures with the presence of critical concentrations of the antimycobacterial drug pyrazinamide. One of 2 FDA-cleared platforms (VersaTREK or BD MGIT 960) may be used.

 

The VersaTrek platform uses the presence or absence of a pressure increase inside broth vials containing M tuberculosis in the presence of critical concentrations of the antimycobacterial drug pyrazinamide. Increasing pressure indicates the presence of actively growing M tuberculosis that is resistant pyrazinamide at 300 mcg/mL. Low or undetectable pressure increases in the presence of critical drug concentration suggests a lack of M tuberculosis growth and susceptibility to pyrazinamide 300 mcg/mL.(Package insert: VersaTREK Mycobacteria Detection and Susceptibility Testing system, TREK Diagnostics, 04/ 2014)

 

The BACTEC MGIT 960 platform uses the production and measurement of fluorescence within a Mycobacterial Growth Indicator Tube (MGIT) in the presence of actively growing M tuberculosis complex isolates in the presence of critical concentration of the antimycobacterial drug pyrazinamide. Low or undetectable levels of fluorescence in the presence of critical drug concentrations suggests lack of M tuberculosis growth and susceptibility to pyrazinamide at 100 mcg/mL. Increased fluorescence suggests active growth of M tuberculosis and resistance to pyrazinamide at 100 mcg/mL.(Package insert: BACTEC MGIT 960 SIRE Kit, BD Diagnostics, 10/ 2016)

PDF Report
Indicates whether the report includes an additional document with charts, images or other enriched information

No

Day(s) Performed
Outlines the days the test is performed. This field reflects the day that the sample must be in the testing laboratory to begin the testing process and includes any specimen preparation and processing time before the test is performed. Some tests are listed as continuously performed, which means that assays are performed multiple times during the day.

Monday through Sunday

Report Available
The interval of time (receipt of sample at Mayo Clinic Laboratories to results available) taking into account standard setup days and weekends. The first day is the time that it typically takes for a result to be available. The last day is the time it might take, accounting for any necessary repeated testing.

10 to 21 days

Specimen Retention Time
Outlines the length of time after testing that a specimen is kept in the laboratory before it is discarded

1 year

Performing Laboratory Location
Indicates the location of the laboratory that performs the test

Rochester

Fees
Several factors determine the fee charged to perform a test. Contact your U.S. or International Regional Manager for information about establishing a fee schedule or to learn more about resources to optimize test selection.

  • Authorized users can sign in to Test Prices for detailed fee information.
  • Clients without access to Test Prices can contact Customer Service 24 hours a day, seven days a week.
  • Prospective clients should contact their account representative. For assistance, contact Customer Service.

Test Classification
Provides information regarding the medical device classification for laboratory test kits and reagents. Tests may be classified as cleared or approved by the US Food and Drug Administration (FDA) and used per manufacturer instructions, or as products that do not undergo full FDA review and approval, and are then labeled as an Analyte Specific Reagent (ASR) product.

This test has been cleared, approved, or is exempt by the US Food and Drug Administration and is used per manufacturer's instructions. Performance characteristics were verified by Mayo Clinic in a manner consistent with CLIA requirements.

CPT Code Information
Provides guidance in determining the appropriate Current Procedural Terminology (CPT) code(s) information for each test or profile. The listed CPT codes reflect Mayo Clinic Laboratories interpretation of CPT coding requirements. It is the responsibility of each laboratory to determine correct CPT codes to use for billing.

CPT codes are provided by the performing laboratory.

87188-Susceptibility, Mycobacterium tuberculosis Complex, Pyrazinamide

87153-Mtb PZA Confirmation, pncA Sequencing (if appropriate)

LOINC® Information
Provides guidance in determining the Logical Observation Identifiers Names and Codes (LOINC) values for the order and results codes of this test. LOINC values are provided by the performing laboratory.

Test Id Test Order Name Order LOINC Value
TBPZA Susceptibility, Mtb Complex, PZA 56026-8
Result Id Test Result Name Result LOINC Value
Applies only to results expressed in units of measure originally reported by the performing laboratory. These values do not apply to results that are converted to other units of measure.
TBPZA Susceptibility, Mtb Complex, PZA 56026-8

Test Setup Resources

Setup Files
Test setup information contains test file definition details to support order and result interfacing between Mayo Clinic Laboratories and your Laboratory Information System.

Excel | PHP Pdf | CMS Pdf

Sample Reports
Normal and Abnormal sample reports are provided as references for report appearance.

Normal Reports | Abnormal Reports

SI Sample Reports
International System (SI) of Unit reports are provided for a limited number of tests. These reports are intended for international account use and are only available through MayoLINK accounts that have been defined to receive them.

SI Normal Reports | SI Abnormal Reports