Test Catalog

Test Id : SUP24

Supersaturation Profile, 24 Hour, Urine

Useful For
Suggests clinical disorders or settings where the test may be helpful

Diagnosis and management of patients with renal lithiasis:

-Predicting the likely composition of the stone, in patients who have a radiopaque stone, for whom stone analysis is not available

-May aid in designing a treatment program

 

 

Aiding in identification of specific risk factors for stones using a 24-hour urine collection

 

Monitoring the effectiveness of therapy by confirming that the crystallization potential has indeed decreased

 

Evaluating kidney excretion of acid and urine pH

 

Estimating a patient's protein intake

Profile Information
A profile is a group of laboratory tests that are ordered and performed together under a single Mayo Test ID. Profile information lists the test performed, inclusive of the test fee, when a profile is ordered and includes reporting names and individual availability.

Test Id Reporting Name Available Separately Always Performed
SSINT Supersaturation, 24 HR, U 1 No Yes
NAUT Sodium, 24 HR, U Yes, (order NAU) Yes
KUT Potassium, 24 HR, U Yes, (order KUR) Yes
CALUT Calcium, 24 HR, U Yes, (order CALU) Yes
MAGT Magnesium, 24 HR, U Yes, (order MAGU) Yes
CLUT Chloride, 24 HR, U Yes, (order CLU) Yes
POUT Phosphorus, 24 HR, U Yes, (order POU) Yes
SULFT Sulfate, 24 HR, U Yes, (order SULFU) Yes
CITT Citrate Excretion, 24 HR, U Yes, (order CITR) Yes
OXUT Oxalate, 24 HR, U Yes, (order OXU) Yes
UPHT pH, 24 HR, U Yes, (order PHU_) Yes
URICT Uric Acid, 24 HR, U Yes, (order URCU) Yes
CTUT Creatinine, 24 HR, U Yes, (order URCU) Yes
OSMUT Osmolality, 24 HR, U Yes, (order UOSMU) Yes
AMMT Ammonium, 24 HR, U Yes, (order AMMO) Yes
UNT Urea Nitrogen, 24 HR, U No Yes
PCRUT Protein Catabolic Rate, 24 HR, U No Yes
DEMO9 Patient Demographics No Yes

Method Name
A short description of the method used to perform the test

AMMT, CITT, OXUT: Enzymatic

OSMUT: Freezing Point Depression

SULFT: High-Performance Ion Chromatography (HPIC)

CALUT, POUT: Photometric

MAGT: Colorimetric Endpoint Assay

UPHT: pH Meter

NAUT, KUT, CLUT: Potentiometric, Indirect Ion-Selective Electrode (ISE)

CTUT: Enzymatic Colorimetric Assay

URICT: Uricase

UNT: Kinetic UV Assay

PCRUT, SSINT: Calculation

NY State Available
Indicates the status of NY State approval and if the test is orderable for NY State clients.

Yes

Reporting Name
Lists a shorter or abbreviated version of the Published Name for a test

Supersaturation, 24 HR, U

Aliases
Lists additional common names for a test, as an aid in searching

Brushite Crystal

Calcium Oxalate Crystal

Hydroxyapatite Crystal

Kidney Stone Disease

Kidney Stone Profile

SAT24

Stone Risk Profile

Uric Acid Crystals

Test

Specimen Type
Describes the specimen type validated for testing

Urine

Necessary Information

1. 24-Hour volume (in milliliters) is required.

2. Patient's height in centimeters and weight in kilograms are required if patient is younger than 18 years.

ORDER QUESTIONS AND ANSWERS

Question ID Description Answers
HT6 Height (cm)
SSVOL Volume
WT6 Weight (kg)
SSDUR Collection Duration

Specimen Required
Defines the optimal specimen required to perform the test and the preferred volume to complete testing

Patient Preparation:

X-ray dyes and contrast media will affect uric acid test results.

-If a kidney X-ray with dye or computerized tomography (CT) scan with contrast has been performed, patient should wait a minimum of 1 day before starting collection.

-If a cholangiography (bile duct X-ray) has performed, patient should wait 7 days before starting collection.

-Urine must be collected before tablets have been taken for gallbladder X-ray, otherwise patient should wait 7 days before starting collection.

Supplies: Diazolidinyl Urea (Germall) 5.0 mL (T822)

Collection Container/Tube: 24-hour graduated urine container with no metal cap or glued insert

Submission Container/Tube: Plastic, 60-mL urine bottle

Specimen Volume: 35 mL

Collection Instructions:

1. Add 5 mL of diazolidinyl urea as preservative at start of collection or refrigerate specimen during and after collection.

2. Collect urine for 24 hours.

3. Specimen pH should be between 4.5 and 8 and will stay in this range if diazolidinyl urea is added at the beginning of the collection or kept refrigerated during the entirety of the collection. Specimens with pH above 8 indicate bacterial contamination, and testing will be canceled. Do not attempt to adjust pH as it will adversely affect results.

4. If not using Germall, the specimen must be kept refrigerated during the entirety of the collection and sent frozen.

Additional Information: See Urine Preservatives-Collection and Transportation for 24-Hour Urine Specimens for multiple collections.

Special Instructions
Library of PDFs including pertinent information and forms related to the test

Forms

Urine Preservative Collection Options

Note: The addition of preservative or application of temperature controls must occur at the beginning of the collection.

Ambient (Not preserved)

No

Refrigerate (Not preserved)

OK

Frozen (Not preserved)

No

50% Acetic Acid

No

Boric Acid

No

Diazolidinyl Urea (Germall)

Preferred

6M Hydrochloric Acid

No

6M Nitric Acid

No

Sodium Carbonate

No

Thymol

No

Toluene

No

Specimen Minimum Volume
Defines the amount of sample necessary to provide a clinically relevant result as determined by the Testing Laboratory

25 mL

Specimen Stability Information
Provides a description of the temperatures required to transport a specimen to the performing laboratory, alternate acceptable temperatures are also included

Specimen Type Temperature Time Special Container
Urine Refrigerated (preferred) 14 days
Frozen 14 days
Ambient 72 hours

Useful For
Suggests clinical disorders or settings where the test may be helpful

Diagnosis and management of patients with renal lithiasis:

-Predicting the likely composition of the stone, in patients who have a radiopaque stone, for whom stone analysis is not available

-May aid in designing a treatment program

 

 

Aiding in identification of specific risk factors for stones using a 24-hour urine collection

 

Monitoring the effectiveness of therapy by confirming that the crystallization potential has indeed decreased

 

Evaluating kidney excretion of acid and urine pH

 

Estimating a patient's protein intake

Clinical Information
Discusses physiology, pathophysiology, and general clinical aspects, as they relate to a laboratory test

Urine is often supersaturated, which favors precipitation of several crystalline phases, such as calcium oxalate, calcium phosphate, and uric acid. However, crystals do not always form in supersaturated urine because supersaturation is balanced by crystallization inhibitors that are present in the urine. Urinary inhibitors include ions (eg, citrate) and macromolecules but remain poorly understood.

 

Urine supersaturation is calculated by measuring the concentration of all the ions that can interact (potassium, calcium, phosphorus, oxalate, uric acid, citrate, magnesium, sodium, chloride, sulfate, and pH). Once the concentrations of all the relevant urinary ions are known, a computer program can calculate the theoretical supersaturation with respect to the important crystalline phases (eg, calcium oxalate).(1)

 

Since the supersaturation of urine has been shown to correlate with stone type,(2) therapy is often targeted towards decreasing the urinary supersaturations identified. Treatment strategies include alterations in diet and fluid intake as well as drug therapy; all designed to decrease the urine supersaturation.

Reference Values
Describes reference intervals and additional information for interpretation of test results. May include intervals based on age and sex when appropriate. Intervals are Mayo-derived, unless otherwise designated. If an interpretive report is provided, the reference value field will state this.

SUPERSATURATION REFERENCE MEANS (Delta G: DG)

Men:

Calcium oxalate: 1.89 DG

Brushite: 0.46 DG

Hydroxyapatite: 4.19 DG

Uric acid: 1.18 DG

 

Women:

Calcium oxalate: 1.59 DG

Brushite: -0.11 DG

Hydroxyapatite: 3.62 DG

Uric acid: 0.89 DG

 

 

INDIVIDUAL URINE ANALYTES

 

OSMOLALITY, 24 HOUR, URINE

0-11 months: 50-750 mOsm/kg

> or =12 months: 150-1,150 mOsm/kg

 

pH, 24 HOUR, URINE

4.5-8.0

 

SODIUM, 24 HOUR, URINE

> or =18 years: 22-328 mmol/24 h

Reference values have not been established for patients who are younger than 18 years of age.

 

POTASSIUM, 24 HOUR, URINE

> or =18 years: 16-105 mmol/24 h

Reference values have not been established for patients who are younger than 18 years of age.

 

CALCIUM, 24 HOUR, URINE

Males: <250 mg/24 h

Females: <200 mg/24 h

Reference values have not been established for patients who are younger than 18 years of age.

 

MAGNESIUM, 24 HOUR, URINE

51-269 mg/24 h

Reference values have not been established for patients who are younger than 18 years of age.

 

CHLORIDE, 24 HOUR, URINE

> or =18 years: 34-286 mmol/24 h

Reference values have not been established for patients who are younger than 18 years of age.

 

PHOSPHORUS, 24 HOUR, URINE

> or =18 years: 226-1,797 mg/24 h

Reference values have not been established for patients who are younger than 18 years of age.

 

SULFATE, 24 HOUR, URINE

7-47 mmol/24 h

 

CITRATE EXCRETION, 24 HOUR, URINE

0-19 years: Not established

20 years: 150-1,191 mg/24 h

21 years: 157-1,191 mg/24 h

22 years: 164-1,191 mg/24 h

23 years: 171-1,191 mg/24 h

24 years: 178-1,191 mg/24 h

25 years: 186-1,191 mg/24 h

26 years: 193-1,191 mg/24 h

27 years: 200-1,191 mg/24 h

28 years: 207-1,191 mg/24 h

29 years: 214-1,191 mg/24 h

30 years: 221-1,191 mg/24 h

31 years: 228-1,191 mg/24 h

32 years: 235-1,191 mg/24 h

33 years: 242-1,191 mg/24 h

34 years: 250-1,191 mg/24 h

35 years: 257-1,191 mg/24 h

36 years: 264-1,191 mg/24 h

37 years: 271-1,191 mg/24 h

38 years: 278-1,191 mg/24 h

39 years: 285-1,191 mg/24 h

40 years: 292-1,191 mg/24 h

41 years: 299-1,191 mg/24 h

42 years: 306-1,191 mg/24 h

43 years: 314-1,191 mg/24 h

44 years: 321-1,191 mg/24 h

45 years: 328-1,191 mg/24 h

46 years: 335-1,191 mg/24 h

47 years: 342-1,191 mg/24 h

48 years: 349-1,191 mg/24 h

49 years: 356-1,191 mg/24 h

50 years: 363-1,191 mg/24 h

51 years: 370-1,191 mg/24 h

52 years: 378-1,191 mg/24 h

53 years: 385-1,191 mg/24 h

54 years: 392-1,191 mg/24 h

55 years: 399-1,191 mg/24 h

56 years: 406-1,191 mg/24 h

57 years: 413-1,191 mg/24 h

58 years: 420-1,191 mg/24 h

59 years: 427-1,191 mg/24 h

60 years: 434-1,191 mg/24 h

>60 years: Not established

 

OXALATE, 24 HOUR, URINE

0.11-0.46 mmol/24 h

9.7-40.5 mg/24 h

Reference values have not been established for patients who are younger than 16 years of age.

 

URIC ACID, 24 HOUR, URINE

Males: > or =18 years: 200-1,000 mg/24 h

Females: > or =18 years: 250-750 mg/24 h

Reference values have not been established for patients who are younger than 18 years of age.

 

CREATININE, 24 HOUR, URINE

Males: > or =18 years: 930-2,955 mg/24 h

Females: > or =18 years: 603-1,783 mg/24 h

Reference values have not been established for patients who are younger than 18 years of age.

 

AMMONIUM, 24 HOUR, URINE

15-56 mmol/24 h

Reference values have not been established for patients who are younger than 18 years or older than 77 years of age.

 

UREA NITROGEN, 24 HOUR, URINE

> or =18 years: 7-42 g/24 h

Reference values have not been established for patients who are younger than 18 years of age.

 

PROTEIN CATABOLIC RATE, 24 HOUR, URINE

56-125 g/24 h

Interpretation
Provides information to assist in interpretation of the test results

Delta G (DG), the Gibbs free energy of transfer from a supersaturated to a saturated solution, is negative for undersaturated solutions and positive for supersaturated solutions. In most cases, the supersaturation levels are slightly positive, even in normal individuals, but are balanced by an inhibitor activity.

 

While the DG of urine is often positive, even in the urine of non-stone formers, on average, the DG is more positive in those individuals who do form kidney stones. The reference values were derived by comparing urinary DG values for the important stone-forming crystalline phases between a population of stone formers and a population of non-stone formers. DG values that are outside the expected range in a population of non-stone formers are marked abnormal.

 

If the urine citrate is low, secondary causes should be excluded, including hypokalemia, renal tubular acidosis, gastrointestinal bicarbonate losses (eg, diarrhea or malabsorption), or an exogenous acid load (eg, excessive consumption of meat protein).

 

A normal or increased citrate value suggests that potassium citrate may be a less effective choice for treatment of a patient with calcium oxalate or calcium phosphate stones.

 

An increased urinary oxalate value may prompt a search for genetic abnormalities of oxalate production (ie, primary hyperoxaluria). Secondary hyperoxaluria can result from diverse gastrointestinal disorders that result in malabsorption. Milder hyperoxaluria could result from excess dietary oxalate consumption or reduced calcium (dairy) intake, perhaps even in the absence of gastrointestinal disease.

 

High urine ammonium and low urinary pH suggest ongoing gastrointestinal losses. Such patients are at risk of uric acid and calcium oxalate stones.

 

Low urine ammonium and high urine pH suggest renal tubular acidosis. Such patients are at risk of calcium phosphate stones.

 

Patients with calcium oxalate and calcium phosphate stones are often treated with citrate to raise the urine citrate (a natural inhibitor of calcium oxalate and calcium phosphate crystal growth). However, since citrate is metabolized to bicarbonate (a base), this drug can also increase the urine pH. If the urine pH gets too high with citrate treatment, one may unintentionally increase the risk of calcium phosphate stones. Monitoring the urine ammonium concentration is one way to titrate the citrate dose and avoid this problem. A good starting citrate dose is about one-half of the urine ammonium excretion (in mEq of each). One can monitor the effect of this dose on urine ammonium, citrate, and pH values and adjust the citrate dose based on the response. A fall in urine ammonium levels should indicate whether the current citrate is enough to partially (but not completely) counteract the daily acid load of that given patient.

 

The protein catabolic rate is calculated from urine urea. Under routine conditions, the required protein intake is often estimated as 0.8 g/ kg body weight.

 

The results can be used to determine the likely effect of a therapeutic intervention on stone-forming risk. For example, taking oral potassium citrate will raise the urinary citrate excretion, which should reduce calcium phosphate supersaturation (by reducing free ionic calcium), but citrate administration also increases urinary pH (because it represents an alkali load), which promotes calcium phosphate crystallization. The net result of this or any therapeutic manipulation could be assessed by collecting a 24-hour urine and comparing the supersaturation calculation for calcium phosphate before and after therapy.

 

Important stone-specific factors:

-Calcium oxalate stones: urine volume, calcium, oxalate, citrate, and uric acid excretion are all risk factors that are possible targets for therapeutic intervention.

-Calcium phosphate stones (apatite or brushite): urinary volume, calcium, pH, and citrate significantly influence the supersaturation of calcium phosphate. Of note, a urine pH below 6 may help reduce the tendency for these stones to form.

-Uric acid stones: urine pH, volume, and uric acid excretion levels influence the supersaturation. Urine pH is especially critical, in that uric acid is unlikely to crystallize if the pH is above 6.

-Sodium urate stones: alkaline pH and high uric acid excretion promote stone formation.

 

A low urine volume is a universal risk factor for all types of kidney stones.

Cautions
Discusses conditions that may cause diagnostic confusion, including improper specimen collection and handling, inappropriate test selection, and interfering substances

Urine is often supersaturated with respect to the common crystalline constituents of stones, even in non-stone formers.

 

Individual interpretation of the supersaturation values in light of the clinical situation is critical. In particular, treatment may reduce the supersaturation with respect to one crystal type but increase the supersaturation with respect to another. Therefore, the specific goals of treatment must be considered when interpreting the test results.

Clinical Reference
Recommendations for in-depth reading of a clinical nature

1. Werness PG, Brown CM, Smith LH, Finlayson B. EQUIL2: a BASIC computer program for the calculation of urinary saturation. J Urol. 1985;134(6):1242-1244

2. Parks JH, Coward M, Coe FL. Correspondence between stone composition and urine supersaturation in nephrolithiasis. Kidney Int. 1997;51(3):894-900

3. Finlayson B. Calcium stones: Some physical and clinical aspects. In: David DS, ed. Calcium Metabolism in Renal Failure and Nephrolithiasis. John Wiley and Sons; 1977:337-382

4. Burtis CA, Bruns DE: Tietz Fundamentals of Clinical Chemistry and Molecular Diagnostics. 7th ed. Saunders; 2014

5. Tiselius HG, Daudon M, Thomas K, Seitz C. Metabolic work-up of patients with urolithiasis: indications and diagnostic algorithm. Eur Urol Focus. 2017 Feb;3(1):62-71. doi:10.1016/j.euf.2017.03.014

Method Description
Describes how the test is performed and provides a method-specific reference

The major analytes evaluated are potassium, calcium, phosphorus, oxalate, uric acid, citrate, magnesium, sodium, chloride, sulfate, ammonium, urea nitrogen and pH. The protein catabolic rate is calculated from urine urea nitrogen using the formula: Protein catabolic rate (g/day) =[(UUN+4)*6.25] g

 

Given the measured urine concentrations of these analytes and the known affinity constants of the ions for each other at the given pH, a computer program (EQUIL2) calculates a supersaturation for each ion pair of interest (eg, calcium oxalate). Results are expressed as a Delta G (DG) value for each ion pair. DG is the Gibbs free energy of transfer from a supersaturated to a saturated solution.(Werness PG, Brown CM, Smith LH, Finlayson B. EQUIL2: a BASIC computer program for the calculation of urinary saturation. J Urol. 1985;134(6):1242-1244; Moreira DM, Friedlander JI, Hartman C, Elsamra SE, Smith AD, Okeke Z. Using 24-hour urinalysis to predict stone type. J Urol. 2013;190(6):2106-2111)

PDF Report
Indicates whether the report includes an additional document with charts, images or other enriched information

Supplemental

Day(s) Performed
Outlines the days the test is performed. This field reflects the day that the sample must be in the testing laboratory to begin the testing process and includes any specimen preparation and processing time before the test is performed. Some tests are listed as continuously performed, which means that assays are performed multiple times during the day.

Monday through Sunday

Report Available
The interval of time (receipt of sample at Mayo Clinic Laboratories to results available) taking into account standard setup days and weekends. The first day is the time that it typically takes for a result to be available. The last day is the time it might take, accounting for any necessary repeated testing.

2 to 5 days

Specimen Retention Time
Outlines the length of time after testing that a specimen is kept in the laboratory before it is discarded

See Individual Test IDs

Performing Laboratory Location
Indicates the location of the laboratory that performs the test

Rochester

Fees
Several factors determine the fee charged to perform a test. Contact your U.S. or International Regional Manager for information about establishing a fee schedule or to learn more about resources to optimize test selection.

  • Authorized users can sign in to Test Prices for detailed fee information.
  • Clients without access to Test Prices can contact Customer Service 24 hours a day, seven days a week.
  • Prospective clients should contact their account representative. For assistance, contact Customer Service.

Test Classification
Provides information regarding the medical device classification for laboratory test kits and reagents. Tests may be classified as cleared or approved by the US Food and Drug Administration (FDA) and used per manufacturer instructions, or as products that do not undergo full FDA review and approval, and are then labeled as an Analyte Specific Reagent (ASR) product.

This test was developed and its performance characteristics determined by Mayo Clinic in a manner consistent with CLIA requirements. It has not been cleared or approved by the US Food and Drug Administration.

CPT Code Information
Provides guidance in determining the appropriate Current Procedural Terminology (CPT) code(s) information for each test or profile. The listed CPT codes reflect Mayo Clinic Laboratories interpretation of CPT coding requirements. It is the responsibility of each laboratory to determine correct CPT codes to use for billing.

CPT codes are provided by the performing laboratory.

82340-Calcium

82436-Chloride

82507-Citrate excretion

82570-Creatinine

83735-Magnesium

83935-Osmolality

83945-Oxalate

83986-pH

84105-Phosphorus

84133-Potassium

84300-Sodium

84392-Sulfate

84560-Uric acid

82140-Ammonium

84540-Urea Nitrogen

LOINC® Information
Provides guidance in determining the Logical Observation Identifiers Names and Codes (LOINC) values for the order and results codes of this test. LOINC values are provided by the performing laboratory.

Test Id Test Order Name Order LOINC Value
SUP24 Supersaturation, 24 HR, U 81232-1
Result Id Test Result Name Result LOINC Value
Applies only to results expressed in units of measure originally reported by the performing laboratory. These values do not apply to results that are converted to other units of measure.
CRU24 Creatinine, 24 HR, U 2162-6
AMU24 Ammonium, 24 HR, U 25308-8
CAU24 Calcium, 24 HR, U 6874-2
CIT24 Citrate Excretion, 24 HR, U 6687-8
OXM24 Oxalate, 24 HR, U (mmol/24 HR) 14862-7
OXG24 Oxalate, 24 HR, U (mg/24 HR) 2701-1
CLU24 Chloride, 24 HR, U 2079-2
BSA1 Patient Surface Area 8277-6
HT6 Height (cm) 3137-7
WT6 Weight (kg) 29463-7
KU24 Potassium, 24 HR, U 2829-0
MGU24 Magnesium, 24 HR, U 24447-5
NAU24 Sodium, 24 HR, U 2956-1
UOSMT Osmolality, 24 HR, U 2694-8
PCRUT Protein Catabolic Rate, 24 HR, U 93746-6
POU24 Phosphorus, 24 HR, U 2779-7
21060 Interpretation 69051-1
616217 Calcium Oxalate Crystal 81623-1
616218 Brushite Crystal 101825-8
616219 Hydroxyapatite Crystal 81622-3
616220 Uric Acid Crystal 101827-4
SSDUR Collection Duration 13362-9
SSVOL Volume 3167-4
SUL24 Sulfate, 24 HR, U 26889-6
UNU24 Urea Nitrogen, 24 HR, U 3096-5
UPHT pH, 24 HR, U 27378-9
URC24 Uric Acid, 24 HR, U 3087-4

Test Setup Resources

Setup Files
Test setup information contains test file definition details to support order and result interfacing between Mayo Clinic Laboratories and your Laboratory Information System.

Excel | PHP Pdf | CMS Pdf

Sample Reports
Normal and Abnormal sample reports are provided as references for report appearance.

Normal Reports | Abnormal Reports

SI Sample Reports
International System (SI) of Unit reports are provided for a limited number of tests. These reports are intended for international account use and are only available through MayoLINK accounts that have been defined to receive them.

SI Normal Reports | SI Abnormal Reports